372 results found
-
Default Canvas Size to 1080
Perhaps a simple change, but the most common resolution we see now has to be 1080p.
Consider changing the default canvas from 1280x720 to 1920x1080.
Thanks.
4 votes -
Remove multiple columns at once
We use 50 or more columns per show and it would be nice to be able to select multiple columns at once and remove them, instead of removing them individually.
1 voteSince Millumin V5, there is a popup to manage multiple columns at once (insert, duplicate, edit, delete, ...)
-
Option for Opacity Effect - Include/Exclude Audio Checkbox
I had a need for the visual part of a video to fade away, but have the "long tail" of the audio continue playing until the next cue. Using the Opacity effect, I was able to fade the video, however the audio also faded.
It would be a useful feature to have a checkbox in the Opacity effect to either include or exclude the audio in the effect.
2 votesNow possible with Milumin V5.
-
No background fade when using colour picker
When choosing a colour for a colour card and using the picker the whole Millumin window fades making it impossible to pick a colour of something on the preview window.
This makes matching a specific colour from a video to match a super painful process (usually export a screen cap, open that in preview leave it viewable and then switch back to Millumin and eye dropper the preview window).0 votesSince Millumin V4, you can edit the color-card directly in the layer's properties.
-
Snap timeline length to content
I would like the be able to change the timeline length to end where the last clip ends on the timeline. It is frustrating to have to Find the out timecode of the last clip and then type that into the settings box for everytimeline.
3 votesYou can trim the timeline to the cursor (for the beginning or the end). Click the "setup" button to do so.
-
Choose on which board you create an interaction
When we duplicate boards we loose a lot of interactions actions.
It would be great to have the possibility to select on which board the interaction works : Board 1, Board 2, Board 3, All Boards of the project...1 voteUse an "interaction group" in Millumin V4 (or above) to limit the scope of some interactions.
-
Enable 10-bit in YUV mode
At the moment, 10-bit is only available in RGB. Thats a pity because most I/O cards (like Decklink 8K) have limitations when working with RGB.
6 votesNow available with Millumin V5.
-
VERTICAL CANVAS AT USER INTERFACE
include the possibility of rotating the canvas to be able to map when you are using a projector in a vertical position
1 voteYou can use a video-routing to do so (separating your content and how it is projected).
-
audio routing
The possibility to set the audio routing of all medias on a layer
1 voteAvailable in Millumin V5
-
Deactivate autogo layer or action momentarily
Hi When we have very short autogo it's very difficult to work on the column (save current state for example) because we can't stop the action of launching the next column.
It would be great to deactivate the layer or the action momentarily.3 votesNow possible in Millumin V5 (use the "eye" icon at layer's level)
-
Browser Interaction via keyboard & mouse
When bringing a browser in to Millumin, sometimes you need to log in or click accept on the page. Currently I don't see any way to do this. Would be great to have an option to enable mouse & keyboard interaction temporarily to get past this
1 voteAlready implemented. Use the "brush" tool.
More info in this article : https://help.millumin.com/docs/playback/medias/#generic
-
allow controls to unfollow transitions and stick with physical control in case of emergency
Hi ,
in ableton we have automations, that we can write then play,
in millumin transitions allow this feature, but in the middle of a transition, it's impossible to take the control back from physical controls that we have set in interaction panel.
For emergency and security reasons it could be great to allow the physical controller and the mouse to take the control over the transition ex for light fixture... cos a show sometimes need the human to take over ...
Ableton has a nice way of making it clear , displaying a different color when automation has been…1 voteYou can use the master for transitions to get manual control over it : https://help.millumin.com/docs/playback/monitor/#masters
-
Audio routing for live audio sources
Audio routing for live audio sources (NDI, live audio/video input capture device, etc) will be good idea. Mechanism is same as audio routing of media files
7 votesAvailable in Millumin V5
-
locking layer to prevent from deleting
hi,
i find it quite "too easy" to delete a whole layer,
we use backspace a lot to delete fixture, clips, boxes and so on,
but sometimes when mistaking we supress a whole layer and cmd+Z solves it
unless you have so much layer that you don't realize it right after
would it be possible to shortcut "delete layer" function with cmd+backsapce?
or even use the locking layer function to prevent suppression of the layer?
thanks1 voteClick the "Edit" menubar then deselect "Allow BACKSPACE alone to delete
-
import a light plot / copy paste a light layer from one session session to another
Hi,
when working on a show we must always adapt the light scenario to the next stage grill, sometimes the vidéo layers are evolving between different shows, both things independently;
So each time i have to create all the fixture from scratch on the light plot, but it would be great to be able to save a light configuration / plot and load it back into the actual session...
Same with the light layer, it's necessary to be able to copy paste them from one session to another,
thanks1 voteYou can import a .millumin file inside a project, so it imports the boards, timelines, interactions or light-plot in this project.More info : https://help.millumin.com/docs/general/tips/#project
-
J'aimerais pouvoir lancer une colonne par le nom du cue en midi
ce serait bien d'avoir l'option de lancer un que par son nom en midi , présentement, il est seulement possible d'entrer le numéro de colonne. Si après coup on ajoute une colonne, je dois refaire tous mes ces midi... c'est pénible en création.
2 votesYou can use the option "binded" in an "launch column" interaction to always target the same column (whatever you then move it or add columns before).
-
AJA card SDI output
Add AJA drivers card for SDI output
3 votesAJA support have been updated to latest library in Millumin V5. Please contact us via email if you have a question.
-
Master Audio Layer for Simplified Audio Output
Millumin should have the ability to designate a master audio layer in a show file so that when you're playing the same video to multiple outputs, the stereo LR of the playback computer doesn't get a doubled audio output. Alternatively, the ability to mute the audio output of an entire layer should exist, not just on a per clip basis.
1 voteIn Millumin V5, you can mute the whole layer (set the audio-volume to 0%).
However, if you run the same content on several place in your canvases, you should rather use copy-layers. Or a video-routing.
-
KEY&FILL Output Option for Blackmagic Ultrastudio Mini HD/4K
The Blackmagic Ultrastudio Mini HD/4K can be used as an external Alpha Keyer. In other Software, for example OBS or ProPresenter you can activate the external Keyer function by using the Ultrastudio Mini HD/4K as an Output. You have 2 SDI Outs and SDI A will show the Fill und SDI B the KEY.
It would be great to add this function to Millumin. Thx!52 votesAvailable in latest beta 4.17 : https://help.millumin.com/docs/general/beta-version/
-
NDI media Audio possibilities
When using NDI Media with render audio enabled it would be nice to get audio routing possibilites. I dont know if I am missing it? But it doesnt seem to appear right now. Also - the vumeter you have at http://help.millumin.com/?page=03_faq/beta#pagePart under Send audio via NDI doesnt seem to appear.
All the best! /Jesper Berger
7 votesAvailable now in Millumin V5
- Don't see your idea?