486 results found
-
Undo description
Hi Philippe, it could be great that the undo function ( via Menu/Edit/Undo )
could integrate the historical of action and show the name of last action
So that when you don't know if an action was succesfully completed ( eg: adding or suppressing a layer by mistake ), we could refer to the undo characteristic instead of browsing the whole patch to see were a change occured...
I use backspace a lot and deletion are sometimes hard to realize...
Many thanks for your work !
Regards1 vote -
decimal
Hi Philippe,
It could be great to integrate more than 2 decimals in shaders values, regarding their integration in the user interface
some of them require lots of accuracy...
many thanks!1 vote -
Simultaneous Multi-board Feature
Ability to run 2 or more boards simultaneously. We could dedicate 1 board to 1 or a group of destination. This could allow us to be more flexible in a multi destination show where we can hold a set of content on 1 screen while allowing us to run a sequence on another. This will be much more capable than dedicating 1 layer to each output.
1 vote -
timeline in timeline stay running
When you create a timeline only for looping content, and you want this loop timeline in another timeline with keyframes/segments, than stops also the loop timeline when you have a segment with "play once"...
1 vote -
Hide / reveal surfaces
When multiple surfaces are overlapping, the only way i found to reveal the masked ones on stage is to change their order… wich is quite annoying !
It would be great to be able to hide or reveal the surfaces when editing them, for example with an "eye" button.1 vote -
Master Audio Layer for Simplified Audio Output
Millumin should have the ability to designate a master audio layer in a show file so that when you're playing the same video to multiple outputs, the stereo LR of the playback computer doesn't get a doubled audio output. Alternatively, the ability to mute the audio output of an entire layer should exist, not just on a per clip basis.
1 vote -
LED lighting upgrade, lighting upgrade, Commercial lighting upgrade, LED upgrade, Commercial Solar System
LED lighting upgrade, lighting upgrade, Commercial lighting upgrade, LED upgrade, Commercial Solar System - My Energy Group is ISO9001:2015 certified National Provider of solar power and LED lighting solutions company from residential homeowners to full-scale commercial systems.
Phone No. +611300687787 - Email: myenergygroup1@gmail.com1 vote -
Board transition and option to use existing column on board transition OR start board at 1st column
It would be nice to be able to fade between boards, but i also get a little "caught" when changing boards as it keeps the last column that was run. I'm wondering if maybe there can be a toggle setting that can be chosen to start board on 1st column when switching between boards or to remain on the last column
1 vote -
Faster Light fixture addressing (Light fixture wizard)
Instead of having to add light fixtures 1 by 1 and edit dmx addresses 1 by 1, it would be handy to be able to select a light fixture from a list (ie. generic or intensity based), enter how many are needed, and then be able to cascade the DMX address based on the address offset.
for example:
1)Be able Create 30 ParCans at once named ParCan 1-30
2)With the range of ParCans selected, change the DMX start address of ParCan to 201
3)After the DMX address has been changed, have the option tossing the following channels 202 to 203…1 vote -
show dmx status even when device is unplugged/offline
Hi
with artnet it's possible to work on the light layer when the device is not plugged in,
but with dmx /usb devices,
the fixtures are frozen and don't show any status so it's quite impossible to work offline and prepare the light show without the interface plugged in,
could it be possible to let us wok offline and indicate the device is not plugged in?
regards1 vote -
interaction panel : better defaults for light fixture
hi,
when you map a fixture intensity to touchosc,
you have to click on the fixture
then on the intensity box
then on the touch osc controller
then tick on the feedback box
then on the linear transformerwhen you use backspace to change the osc controller of
a fixture, everything has to be done again so that for a 100 projectors it makes a lot of actions...Could we default:
- intensity box as already selected when you select a fixture while interaction panel open
- feedback to be on ( usually osc needs it and some who don't…1 vote -
Maths calculations in size boxes
Can boxes that have values allow for maths calculation. For example I want to work out the value for a vertical crop. I would like to enter 1920-192 and push enter and get the answer in the box.
This would also apply of any other box - particularly in slice editors where it would be really really useful
1 vote -
audio routing
The possibility to set the audio routing of all medias on a layer
1 vote -
Audio track set in tempo and measure
Audio track could be set in tempo and display measures so it would be so easy to trig some OSC command to external computer in time with the music
1 vote -
VERTICAL CANVAS AT USER INTERFACE
include the possibility of rotating the canvas to be able to map when you are using a projector in a vertical position
1 vote -
Saved projects have to be reset
After saving a project, going to a new project then coming back to the original project, the viewing settings have to be reset/resized and outputs have to be reset also. WHY?
1 vote -
Countdown clock
Add a frame accurate countdown clock that follows single or multiple columns and also follows if content is jumped to :30, :20, :10.
1 vote -
Select multiple canvases in a video routing
Being able to select multiple canvases in the configuration of a video routing to move them all together without needing to do it one by one.
1 vote -
Display Test Card Option
Currently, Millumin v04 displays a test card based on each individual output's configuration. For projects that use canvases that span output connectors (blended projection or widescreen LED wall shows), having the Display Test Card able to generate a Test Card that reflects the whole canvas as one would be handy for setting up.
1 vote -
Dim Disabled Layers
A layer can be disabled by clicking the eye icon next to the layer name, which then changes to an "X".
It would be a nice enhancement (IMHO) if, when not in "Edit Board" mode, the thumbnails were dimmed to reinforce the disabled status.
1 vote
- Don't see your idea?