485 results found
-
Selectable audio transition time, independent of column transition
Currently when transitioning across columns the audio on a clip also fades. I would like to be able to set a transition time for the audio separately, so that a clip that has an audio hard start doesn't have the fade applied - in this example the transition time would be 0s
2 votes -
Smooth an OSC Value without map the value
At this time if we want to smooth an OSC Value, we have to use "transform" which wants us to give in min, in max, out min and out max. It can be useful to have an option to smooth the value without specifying theses limits
3 votes -
Maths calculations in size boxes
Can boxes that have values allow for maths calculation. For example I want to work out the value for a vertical crop. I would like to enter 1920-192 and push enter and get the answer in the box.
This would also apply of any other box - particularly in slice editors where it would be really really useful
1 vote -
Link multiple DMX states in timeline
It would be nice that when we program DMX in timeline, we could sync de value of multiple channels so we don't have to copy and paste for each lights that we want to do the same thing.
If we can have an other type of keyframe in a track in timeline that allows us to sync it for a period of time with the value of an other track, it would be so great !4 votes -
Deactivate autogo layer or action momentarily
Hi When we have very short autogo it's very difficult to work on the column (save current state for example) because we can't stop the action of launching the next column.
It would be great to deactivate the layer or the action momentarily.3 votes -
interaction panel : better defaults for light fixture
hi,
when you map a fixture intensity to touchosc,
you have to click on the fixture
then on the intensity box
then on the touch osc controller
then tick on the feedback box
then on the linear transformerwhen you use backspace to change the osc controller of
a fixture, everything has to be done again so that for a 100 projectors it makes a lot of actions...Could we default:
- intensity box as already selected when you select a fixture while interaction panel open
- feedback to be on ( usually osc needs it and some who don't…1 vote -
Multiple sélection of dmx lights in monitor/light
Hi
When I need to change all fixtures device I have to do it 1 by 1 it could be so much more convenient to select the all with cams+a or click first then shift +click last to select them all and route to a different device
Thx3 votes -
DMX chanel number box, make it larger please ;-)
Hi,
when we type the number of the dmx chanel in the number box for a fixture,
the box is too small and we don't see more than 1 or 2 number, which makes it a bit difficult to check what we are typing before typing enter,
thanks2 votes -
show dmx status even when device is unplugged/offline
Hi
with artnet it's possible to work on the light layer when the device is not plugged in,
but with dmx /usb devices,
the fixtures are frozen and don't show any status so it's quite impossible to work offline and prepare the light show without the interface plugged in,
could it be possible to let us wok offline and indicate the device is not plugged in?
regards1 vote -
Faster Light fixture addressing (Light fixture wizard)
Instead of having to add light fixtures 1 by 1 and edit dmx addresses 1 by 1, it would be handy to be able to select a light fixture from a list (ie. generic or intensity based), enter how many are needed, and then be able to cascade the DMX address based on the address offset.
for example:
1)Be able Create 30 ParCans at once named ParCan 1-30
2)With the range of ParCans selected, change the DMX start address of ParCan to 201
3)After the DMX address has been changed, have the option tossing the following channels 202 to 203…1 vote -
9 votes
-
Board transition and option to use existing column on board transition OR start board at 1st column
It would be nice to be able to fade between boards, but i also get a little "caught" when changing boards as it keeps the last column that was run. I'm wondering if maybe there can be a toggle setting that can be chosen to start board on 1st column when switching between boards or to remain on the last column
1 vote -
Right click menu on the dashboard
Right click isn't used very much in Millumin and would save a lot of boring setup on the dashboard. Right clicking on a clip on the dashboard should let you set its loop setting, edit (open the timeline if it is one), even colorising a single clip for better visibility (as you can with column headers), reveal in library, copy, paste.... the usual stuff.
I recently programmed a show that need 1/2 follow ons and the others all different play types. It took quite a while to to do 140 settings that would be easy with a right click.
Also…3 votes -
AJA card SDI output
Add AJA drivers card for SDI output
3 votes -
Spare control
Ability to control a spare computer during shows : same Millumin project opened on 2 computers linked via RJ45, each cue on the main project would trigger the spare one.
5 votes -
LED lighting upgrade, lighting upgrade, Commercial lighting upgrade, LED upgrade, Commercial Solar System
LED lighting upgrade, lighting upgrade, Commercial lighting upgrade, LED upgrade, Commercial Solar System - My Energy Group is ISO9001:2015 certified National Provider of solar power and LED lighting solutions company from residential homeowners to full-scale commercial systems.
Phone No. +611300687787 - Email: myenergygroup1@gmail.com1 vote -
Audio routing for live audio sources
Audio routing for live audio sources (NDI, live audio/video input capture device, etc) will be good idea. Mechanism is same as audio routing of media files
7 votes -
J'aimerais pouvoir lancer une colonne par le nom du cue en midi
ce serait bien d'avoir l'option de lancer un que par son nom en midi , présentement, il est seulement possible d'entrer le numéro de colonne. Si après coup on ajoute une colonne, je dois refaire tous mes ces midi... c'est pénible en création.
2 votes -
Output info over machine resources
It will be great if Millumin can show real time information on screen over graphic card resources and loads, to identify if new M1 & M2 processors will delay more than 1 frame between their outputs, as M1 & M2 are not able to sync like Nvidia or AMD. An indicator of frame delay between outputs will be great.
3 votes -
Master Audio Layer for Simplified Audio Output
Millumin should have the ability to designate a master audio layer in a show file so that when you're playing the same video to multiple outputs, the stereo LR of the playback computer doesn't get a doubled audio output. Alternatively, the ability to mute the audio output of an entire layer should exist, not just on a per clip basis.
1 vote
- Don't see your idea?