461 results found
-
Faster Light fixture addressing (Light fixture wizard)
Instead of having to add light fixtures 1 by 1 and edit dmx addresses 1 by 1, it would be handy to be able to select a light fixture from a list (ie. generic or intensity based), enter how many are needed, and then be able to cascade the DMX address based on the address offset.
for example:
1)Be able Create 30 ParCans at once named ParCan 1-30
2)With the range of ParCans selected, change the DMX start address of ParCan to 201
3)After the DMX address has been changed, have the option tossing the following channels 202 to 203…1 vote -
show dmx status even when device is unplugged/offline
Hi
with artnet it's possible to work on the light layer when the device is not plugged in,
but with dmx /usb devices,
the fixtures are frozen and don't show any status so it's quite impossible to work offline and prepare the light show without the interface plugged in,
could it be possible to let us wok offline and indicate the device is not plugged in?
regards1 vote -
interaction panel : better defaults for light fixture
hi,
when you map a fixture intensity to touchosc,
you have to click on the fixture
then on the intensity box
then on the touch osc controller
then tick on the feedback box
then on the linear transformerwhen you use backspace to change the osc controller of
a fixture, everything has to be done again so that for a 100 projectors it makes a lot of actions...Could we default:
- intensity box as already selected when you select a fixture while interaction panel open
- feedback to be on ( usually osc needs it and some who don't…1 vote -
Audio track set in tempo and measure
Audio track could be set in tempo and display measures so it would be so easy to trig some OSC command to external computer in time with the music
1 vote -
Saved projects have to be reset
After saving a project, going to a new project then coming back to the original project, the viewing settings have to be reset/resized and outputs have to be reset also. WHY?
1 vote -
Countdown clock
Add a frame accurate countdown clock that follows single or multiple columns and also follows if content is jumped to :30, :20, :10.
1 vote -
Select multiple canvases in a video routing
Being able to select multiple canvases in the configuration of a video routing to move them all together without needing to do it one by one.
1 vote -
Display Test Card Option
Currently, Millumin v04 displays a test card based on each individual output's configuration. For projects that use canvases that span output connectors (blended projection or widescreen LED wall shows), having the Display Test Card able to generate a Test Card that reflects the whole canvas as one would be handy for setting up.
1 vote -
Dim Disabled Layers
A layer can be disabled by clicking the eye icon next to the layer name, which then changes to an "X".
It would be a nice enhancement (IMHO) if, when not in "Edit Board" mode, the thumbnails were dimmed to reinforce the disabled status.
1 vote -
Possibility to deactivate a warping without erasing it
Hy, actually when we warp on the output of a Canvas or on a layer, as soon as we deactivate the warping, we can't recover it. It's like a reset.
It's very furstrating on heavy warping to loose the work done.
Is it possible to have a kind of historic warping or simplier with / without ?1 vote -
shortcut save current state
Hello, it would be great to have a shortcut for the action : save current state in the column
1 vote -
Add Position X / Y on a mask setup
Hello it would be usefull to add Position X & Y to the mask to be able to work as a follow spot.
Actually we can do it by moving the x & y of the layer supporting the mask but when we play also with the scale it result very big resolution for solid color card or medias1 vote -
two ideas
I often need to dup in show and the dup multi columns feature is too complex. How about using Cmd-D?
also the Time/Cues list could be a pop-up list, selectable without that hard window.
1 vote -
output preview
ability to preview (in preview grid ?) the output of canvas and video routers (after their mapping).
actually, it could be done via syphon…
1 vote -
Loop Mode Got-to specific column at end of media
in the loop mode dropdown on a media clip, we need an option to goto a specific column. this would allow for multipule 'loops' of media to be run on a single dash board without having to create multipule timelines.
1 vote -
Make a group of independant layers
I need to be able to run multiple video loops in the dashboad without having to use timelines. one would would be to be able to group independant layers and have them auto follow each other. otherwise allowing multipule dashboards to run at the same time targeting different canvases
1 vote -
UV unwrap for OBJ
We use a lot of create LED and we need a way to input an OBJ files and have the content output as per the UV map that is attached to it.
1 vote -
Make it so millunodes are not forgotten in the output when millunodes are quit in remote computers.
Make it so millunodes are not forgotten in the output (Make the last connection the default instead of "This Computer") when millunodes are quit in remote computers. We launch more than 50 computers at the beginning of the day and it becomes time consuming to connect to each of them over the network one by one to tell them to reconnect to the correct display they last connected to that's running millunode.
1 vote -
DMX Layer works only with video on the column.
It would be cool if "DMX Layer" are working only if there's a video (to control lights) on the column. Therefore, you can play manually it.
Or the ability to have a specific video layer for the dmx layers (lights) and also a "normal video" layer (for outputting on the beamer).
When you have a light AND a DMX Layer with the same adress (same projector), the slider is always back up at zero, even if we don't put video in (detecting black of the canvas). So we can jump to a "scripted lights show" from video and then back…
1 vote -
Touchdesigner Tox FX filter
The possibility of using Touchdesigner tox as effect filters and/or layers (like VDMXplus6)
1 vote
- Don't see your idea?